20W Laser Engraver/Cutting 2Axis

Model : 20W Laser Engraver/Cutting 2Axis
           

           

           

Introduction

Master engraving machine is a portable engraving machine with simple installation, safety and easy operation. It has built-in sensor accelerometer. When the machine tilts, it will automatically stop laser work and protect from laser damage. At the same time, it supports NEJE control software and GRBL software, which can not only enjoy the simple portability of NEJE software, but also support the operation fun of GRBL open source software; it supports the dynamic control laser module developed by Neje, which can support PWM power regulation, low light brightness regulation, laser temperature induction protection; it also supports different power lasers. The master 3500 is especially good at grayscale engraving. The master 7w specializes in metal engraving and deep wood engraving and cutting. The Master 20W excels in fast cutting and can cut materials from 3mm to 5mm thickness.

NEJE MASTER 20W Description

NEJE MASTER 20W Laser Engraving Machine DIY Mini CNC Cutting Wood Router Desktop Engraver for Windows XP/7/8/10/Macbook Main applications: Cutting, metal engraving, drawing depth engraving, etc. (Especially good at cutting, It can cut wood (3-7mm). It supports metal engraving including alumina oxide, iron oxide and other non-reflective materials, depth of engraving (0.5-3mm wood), thickness of cutting(2mm) Supported engraving materials: Wood, gray paper, leather, bamboo, blackening plastics, rubber, alumina oxide, iron oxide, etc. It is not possible to directly engrave the metal with strong mirror reflectivity, which may cause injury to the operator or burn the laser. ) Note: 1. can not engrave on stainless steel, alumina, Alloy, silver and other reflective metal. 2. Can only cut natural wood / paper / leather. Can not cut MDF plywood and other Synthetic wood.